15t overhead cranes are sold from China to Algeria

As an excellent Chinese crane supplier providing crane services for the world, we can provide Algerian customers with various types of cranes and accept crane customization services in special working environment. In fact, due to the limitation of working environment, the cranes required by different customers rarely have exactly the same situation. This will test the ability of a crane supplier. Today, we will share an order for 15トン天井クレーンからアルジェリア. I hope it can help you

Main parameters of overhead crane in Algeria

Lifting capacity: 15 Ton
吊り上げ高さ9メートル
Span: 24 meters,
Voltage: 380V, 50Hz, 3P,

15 ton overhead crane design drawing

Installation of overhead cranes for Algerian customers

Hoisting machinery is a special type of equipment and has a high degree of danger. Therefore, in the installation of cranes, safety work is particularly important. Special attention must be paid to the following aspects:

Most of the cranes are mechanical devices with large structures and complicated structures. Usually, it is difficult to transport the entire crane. It is often the entire assembly of the equipment that is transported to the site of use. Therefore, it must be properly installed to reflect the overall eligibility of the crane in order to verify the integrity and integrity of the crane.
The overhead crane is to be operated on the track of the use site or the building. Therefore, for the operational track or the installation foundation, and whether the crane itself can work well with each other, whether the operation is adaptable and whether it can meet the strict requirements for use, it must be concluded through proper installation and commissioning and inspection after installation.
The safety requirements of cranes are extremely high, and the safety devices must be perfect and installed correctly to achieve reliable, flexible, and accurate technical requirements.
According to the importance of crane safety work, in order to enable the crane to meet the operational requirements of various loads after being put into use, the crane must be tested for no-load, full-load, and overload static load and dynamic load in accordance with regulations. However, these tests must be carried out in the operating state or in a certain stationary state of the crane mechanism. This requires the use of a load test after the crane has been installed.
The overhead crane's wire ropes and other flexible parts and many other parts will undergo some elongation, deformation, looseness, etc. after the initial load. This also requires repairs, adjustments, handling, and tightening after the crane has been mounted and the load has been tested. Therefore, it is necessary to do a series of work such as crane installation, commissioning, and speed control to ensure safe and normal use of the crane in the future.