How to ensure safety when operating a freestanding bridge crane?

In industrial production process, various lifting equipment have greatly improved industrial production efficiency, while also improving production safety and reducing labor intensity. However, no matter how the lifting equipment develops, no matter when, safety is the primary principle of the lifting industry. Today, let’s take a look at how to ensure safety when operating a freestanding bridge crane.

How to ensure safety when operating freestanding bridge cranes

1. When using the crane, it should move steadily and slowly to avoid sudden lifting movement. Before lifting the object, you need to tighten the slack place of the sling and hook; before the hoist is lifted, in order to avoid the lifting object swinging at the beginning of the lifting, the bridge crane equipment needs to be directly above the hoisted objects. Do not swing the hoisted objects into the area outside the equipment; the freestanding bridge crane must be vertical to the lifting rope and do not diagonally pull the bridge crane.
2. When using the freestanding bridge crane, ensure that all people in the nearby area stay away from the objects. At the same time, pay attention to the moving speed and moving method of the lifting objects. Do not overload when lifting. Make sure that the spreader is in the hook before moving the lifting object.
3. No matter what happened, the lifting objects should not stay in the air unless there is a problem with the control power supply. When the power supply has a problem, the operator needs to keep the objects close to the ground as much as possible to prevent sudden falling and causing danger; At this time, the operator cannot leave the control area at will; if the sling becomes loose, the object cannot be lifted. If all the slings cannot meet the conditions of use, they need to be replaced in time.
4. When the freestanding bridge crane is suspended from use, it is necessary to remove all the slings from the hooks of the equipment, because when the equipment is moving, the slings suspended on the hooks will cause a potential hazard; Operators should not transport lifting objects above people. When using magnets or vacuum chuck devices, they need to be particularly careful. The lifting objects are likely to fall, because if the power of the magnet or vacuum equipment fails, the lifting objects will fall, so use Pay special attention to it.

Therefore, in order to ensure the safety of the freestanding bridge crane operation, everyone needs to know more about the above methods. Before putting the freestanding bridge crane into use, operators must carry on professional systematic training, and can operate only after being qualified.

How to ensure safety when operating a freestanding bridge crane?

Поделиться на Facebook

Твитнуть

Подпишитесь на нас

Сохранить