Application of Jib Crane in Pakistan Automobile Factory

Table of Contents

Jib cranes are widely used in daily material and workpiece handling and lifting. This case further analyzes the wide application, portability and flexibility of the jib crane by introducing the application of the 0.5-ton manual rotating 270-degree jib crane produced by our company in the automobile assembly factory.

Main parameters of 0.5 ton jib crane

Lifting weight: 0.5 tons
Lifting height: 3.6 meters
Arm length: 2.6 meters
Rotation angle: 270 degrees
Rotation method: manual rotation

Requirements for Jib Cranes of Pakistan Automobile Factory

The case comes from an automobile factory in Pakistan. Due to the renovation and upgrading of the workshop, the customer needs to add 2 sets of 0.5 tấn cần cẩu and the corresponding kbk track of 40 meters in order to lift the materials. The rotation radius of the jib crane is 2.6 meters. Through the on-site transformation and upgrading, the handling automation and logistics coverage can be realized. In order to improve the efficiency of the production line, effectively promote the improvement of the production management level, and play an important role in the system production line.

0.5 ton jib crane design drawing

Key points of designing a jib crane for a Pakistani car factory

Rated lifting capacity
Cantilever radius of gyration (note: radius of gyration and arm length are two concepts, radius of gyration is the distance from the inner side of the arm to the far end of the wall, and the arm length is the length of a single-fingered arm)
Lifting height (the distance of the hook from the ground to the upper limit position)
The total net height inside the workshop
Whether the thickness of the concrete on the ground should be pre-buried (generally, pre-buried foundation is required for 1 ton and above, but not for 500 kg and below).
Whether the rotation of the rotating arm is electric or manual (it is generally recommended for customers to rotate manually within 500kg, and electric rotation for 1t and above), and whether the hoist operation trolley is electric or manual (generally, it is recommended that customers with 1t and above be equipped with an electric trolley)

The Other jib crane cases in Pakistan

Cách mua cần cẩu jib từ Trung Quốc

Chúng tôi có một cần cẩu sản xuất nằm ở Trung quốc, cung cấp các cần cẩu biến dịch vụ toàn cầu cẩu khách hàng. Nếu bạn muốn để chỉnh một cẩu, bạn có thể để lại một tin nhắn trên trang web hay Email: sales010@cranesdq.com, nói cho chúng tôi những thông tin sau, và chúng tôi quản lý bán hàng sẽ liên lạc với bạn: