Application of Jib Crane in Pakistan Automobile Factory

Jib cranes are widely used in daily material and workpiece handling and lifting. This case further analyzes the wide application, portability and flexibility of the jib crane by introducing the application of the 0.5-ton manual rotating 270-degree jib crane produced by our company in the automobile assembly factory.

Main parameters of 0.5 ton jib crane

• Lifting weight: 0.5 tons
• Lifting height: 3.6 meters
• Arm length: 2.6 meters
• Rotation angle: 270 degrees
• Rotation method: manual rotation

Requirements for Jib Cranes of Pakistan Automobile Factory

The case comes from an automobile factory in Pakistan. Due to the renovation and upgrading of the workshop, the customer needs to add 2 sets of 0.5-ton jib cranes and the corresponding kbk track of 40 meters in order to lift the materials. The rotation radius of the jib crane is 2.6 meters. Through the on-site transformation and upgrading, the handling automation and logistics coverage can be realized. In order to improve the efficiency of the production line, effectively promote the improvement of the production management level, and play an important role in the system production line.

0.5 ton jib crane design drawing

Key points of designing a jib crane for a Pakistani car factory

1.  Rated lifting capacity
2.  Cantilever radius of gyration (note: radius of gyration and arm length are two concepts, radius of gyration is the distance from the inner side of the arm to the far end of the wall, and the arm length is the length of a single-fingered arm)
3.  Lifting height (the distance of the hook from the ground to the upper limit position)
4.  The total net height inside the workshop
5.  Whether the thickness of the concrete on the ground should be pre-buried (generally, pre-buried foundation is required for 1 ton and above, but not for 500 kg and below).
6.  Whether the rotation of the rotating arm is electric or manual (it is generally recommended for customers to rotate manually within 500kg, and electric rotation for 1t and above), and whether the hoist operation trolley is electric or manual (generally, it is recommended that customers with 1t and above be equipped with an electric trolley)

The Other jib crane cases in Pakistan

• 1t Pillar Mounted Jib Crane with Electric Chain Hoist for sale to Pakistan
• Jib crane used in Pakistan agricultural machinery parts processing plant
• Application of Jib Crane in Pakistan Automobile Factory
• Pakistan auto factory custom jib crane from China
• 2 ton jib crane for clean room in Pakistan
• 2 Ton Jib Crane Applied in Pakistan Stone Factory
• Application of Jib Crane in Pakistan Engine Factory
• 2 ton jib crane used in Pakistan cotton spinning mill
• Pakistan customized 2 ton mobile jib crane case
• Application of 360-degree free standing jib crane in Pakistan
• Fixed column jib crane used in Pakistan copper plant
• Design and install jib cranes for Pakistan Steel Plant
• Type of jib crane supplied to Pakistan
• 0.5T BZ jib crane is sold from China to Pakistan
• 2 ton jib crane is sold from China to Pakistan
• 10 ton Portable Jib Crane sale to Pakistan

How to buy jib crane from China

We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a jib crane, you can leave a message on the website or Email: sales010@cranesdq.com, tell us the following information, and our sales manager will contact you:

• Lifting capacity?
• Lifting height? (Distance from hook to ground)
• Arm length? (The length of the arm and the effective moving length)
• Power supply? (Standard power supply is 220V/380V, 3Ph, 50/60Hz)
• Application? (What materials to be lifted)

Share on Facebook

Tweet

Follow us

Save