Pulley is a kind of wear part on crane . It often works with wire rope to change the direction of wire rope force, increase the number of stressed wire ropes, and reduce the weight of the object on the wire rope. In the daily use of the crane, always check the usage of the pulley. The editor introduces the common faults and solutions of the crane pulley.
Common faults of pulleys :
1. Uneven wear of pulley rope groove
2. The wear of the pulley mandrel reaches 3%～5% of the nominal diameter
3. The pulley won't turn
4. The pulley is tilted and loose
5. Pulley cracks or broken rims
Causes of pulley failure
1. Uneven materials, substandard installation, poor contact between ropes and wheels
2. Spindle damage
3. Increased wear of mandrel and wire rope
4. Loose positioning parts on the shaft, or rope skipping
5. Pulley damage
Troubleshooting
1. The wear of the wheel groove wall reaches 1/10 of the original thickness, and it should be replaced when the radial wear reaches 1/4 of the rope diameter.
2. Replace
3. Strengthen lubrication, overhaul
4. Loose positioning parts on the shaft, or wire rope skipping for maintenance
5. Replace
If the pulley is seriously damaged and not repaired or replaced in time, it may increase the load of the crane and even cause some more serious failures and accidents. Therefore, companies must pay attention to the inspection of pulleys.
الاتصال لدينا كرين المتخصصين
أرسل لنا رسالة وسوف نقوم بالرد عليك في أقرب وقت ممكن.
Arabic 
English 
Spanish 
Japanese 
French 
Indonesian 
Thai 
Russian 
Vietnamese