Floor mounted jib cranes

Floor-mounted jib cranes are lightweight, have a twist-free steel girder construction with low headroom. The boom is fitted with a bearing, pillar made from reinforced steel pipe. Depending on the size of the hoist and in combination with festooned power cables, restrictions in the slewing range of the boom may be possible. The slewing range is limited to 270 °.

• The model PFSP has a base flange with anchor bolts and template. Anchoring the base plate (welded) or anchoring the dowel base plate (bolted) including mortar cartridges, anchor studs (complete with nuts, locknuts and washers). The unit can be mobile for changable locations
• Optional, slew stoppers (buffers) can be fitted on building sites for a pre-determined fixed slewing range. Slewing brakes cana be used to contol the boom speed during slewing. For outdoor use, the crane can be covered in an increased paint layer or hot-dip galvanisation. A manual locking device or hoist cover can be added in addition.

The floor-mounted jib crane PFM and PFP with a slewing range of 360 ° are also lightweight, with a twist-free steel girder construction with low headroom. Compact rotating head for ideal construction dimensions; access from above ensures easy assembly. The boom is fitted with a roller bearing, pillar made from reinforced steel pipe. Depending on the size of the hoist and in combination with festooned power cables, restrictions in the slewing range of the boom may be possible.

• The model PFP can be fitted with an optional electrically driven slewing gear.
• The max. capacity of the model PFM is 50 to 1000 kg while the PFP reaches 500 to 3200 kg.

Foundationless Floor Mounted Jib Cranes

Foundationless free standing jib cranes save time and money on installation by eliminating the need to pour a foundation, while still providing the full 360 degree coverage of a free standing jib crane. Dongqi offers Gorbel floor mounted jib cranes in a wide range of sizes and capacities up to 1/2 Ton to best meet your needs.

Advantages of a Foundationless Floor Mounted Jib Crane

• Save time and money - pouring a foundation can cost as much as the jib crane and require a week to cure.
• Can be mounted directly to most concrete surfaces, including loading docks.
• Can be mounted closer to walls, machines and other obstructions or under larger overhead cranes to provide staged coverage.
• Can be easily relocated easily as your needs evolve.
• Circular coverage allows each jib crane to serve multiple workstations.
• Precision tapered bearings mean easy rotation and retaining pin resists accidental upward dislodgement of the boom assembly.
• Structurally designed in accordance with the AISC Steel Construction Manual.
• Meets OSHA Specification 1910.179 and ANSI Specification B30.11 for Jib and Overhead Cranes.
• Floor mounted jib cranes available in a variety of size and capacity options (see below).
• Wide variety of options available, including stops, festoons and portable base.