The LD single-beam crane is mainly composed of four parts: metal structure, operating mechanism, hoisting mechanism and electrical equipment. Our editor will give you a brief introduction to these four parts:
1. LD electric single beam crane Metal structure
The main girder of the single-beam crane adopts a U-shaped groove formed by steel plate rolling, and then is assembled and welded with an I-beam to form a box-shaped main girder. , The beams can be disassembled and transported, and high-strength bolts are used to form a bridge during installation.
2. LD electric single beam crane Operating agency
The operating mechanism of a single-beam crane generally adopts a separate driving mode, and the driving and braking are completed by a conical motor, and the transmission adopts an "open-close" type gear transmission.
3. LD electric single beam crane Lifting mechanism
Single-beam cranes generally use wire rope electric hoist as the lifting mechanism, and the electric hoist can be of type CD1 or MD1. The electric hoist is hung on the I-beam under the main beam and walks left and right by the trolley.
4. LD electric single beam crane Electrical equipment
The motor used in this product is a conical motor with a brake device. The control box is a dedicated electrical control box (when operating on the ground) or a protective cabinet plus cam controller operation control (when operating in the driver's cab). The running speed when operating on the ground: 20m /min; 30m/min; control room operation is 45m/min; 60m/min. The crane is equipped with safety devices and has high reliability.
الاتصال لدينا كرين المتخصصين
أرسل لنا رسالة وسوف نقوم بالرد عليك في أقرب وقت ممكن.
Arabic 
English 
Spanish 
Japanese 
French 
Indonesian 
Thai 
Russian 
Vietnamese