The lifting mechanism of the electric single beam crane only rises but does not fall or only falls but does not rise

In the previous article, we introduced the problem of the hook sliding when lifting heavy objects . One is that the braking torque of the brake is not enough, and the other is that the brake ring is damaged. The solution is to adjust the brake torque and replace the brake ring. Today, the editor of our factory will introduce to you the cause and solution of the problem that the lifting mechanism of the electric single-beam crane only rises but does not fall, or only falls but does not rise:

1. Damaged overload limiter
2. The limit switch is damaged
3. The contactor contacts are burnt out
4. Control line breakage

الحل:

1. Fix the overload limiter
2. Replace the limit switch
3. Replace the contactor
4. Check the control line

The contactor is closed but the mechanism does not work

Cause of issue:

1.  The ascending limit card owner has not returned
2.  The brake won't open
3.  Damaged motor high-speed gear

الحل:

1.  Repair the rising limit switch
2.  Check whether the brake is sensitive
3.  Replace the high-speed gear

The hooks of electric single-beam cranes can only rise or fall are possible problems. When a problem occurs, it is necessary to calmly analyze the cause of the failure, solve the problem in time, and reduce the impact on the production of the enterprise.

مشاركة على Facebook

سقسقة

تابعونا

حفظ