Home → Gantry crane

Gantry cranes are widely used when the lifting is needed without the cost of a building or support steel work. The gantry cranes can be placed indoors or outdoors, used for activities in steel stock yards, pre-cast segment yards, construction sites and other outdoor application.

Dongqi Crane can provide a complete range of gantry cranes, i.e. full gantry cranes, semi-gantry cranes and portable gantry cranes, including single girder, double girder, single leg, double leg, and cantilever styles for indoor or outdoor service. The capacities, spans, heights can be customized.

Single girder gantry crane


  • It is consisted with gantry frame (main girder,legs,bottom end beams),lifting mechanism, travelling mechanism,and electrical control.
  • It is used with matching CD1 or MD1 electric hoist,and is a light small crane with rail travelling.
  • Widely used in workshop,storage, port and hydroelectric power station and some other outdoor places, where it has a low frequency or few lifting times.
  • It is forbidden to be used with melt metal,inflammable, or explosive objects.
  • It can be designed with one hanging arm or no-hanging arm according to client's demand.

Type:MH

Lifting capacity:3~32t

Span: 12~35m

Working class:A3,A4,A5

Ambient temperature:-20-40℃

Application:This product is a regular crane widely used at open ground and warehouses to load,unload and grab materials.It has 2 controlling methods.namely ground controlling and room controlling.

Heavy duty gantry crane


  • Design and manufacture according to GB/T 14406"General gantry crane".
  • Mainly made up of bridge, trolley.crane traveling mechanism and electric system.
  • All the procedure is finished in the operating room.
  • Applies to the open warehouse or rail along for general handling and lifting work.
  • Also can be equipped with other lifting devices like grab or container spreader or etc.for special work.Prohibited for high temperature, flammable, explosive, corrosion, overloading, dust or other dangerous operations.

Type:MG

Lifting capacity:5t~500 t

Span: 18-35m

Working class:A5,A6

Ambient temperature:-20~+40°℃

Application:This product is a regular crane widely used at open ground and warehouses to load, unload and grab materials. it has 2 controlling methods,namely ground controlling and room controlling.

Heavy duty gantry crane

  Contact our crane specialists


Send us a message and we will get back to you as soon as possible.

    Gantry crane case


    5 ton portable gantry crane sold to Mexico in 2024

    Portable gantry crane procurement parameters In February 2024, Dongqi Crane designed and manufactured a 5-ton portable gantry crane for a Mexican customer. This was the first time that the customer pu[...]

    2024 MHO 10-ton gantry crane sold to Mongolia

    MHO gantry crane procurement parameters In February 2024, Dongqi Crane began to manufacture an MHO gantry crane for a factory in Mongolia. This was the first time that the customer purchased crane equ[...]

    5 ton aluminum alloy portable gantry crane sold to Philippines in 2024

    Portable gantry crane procurement parameters In January 2024, Dongqi Hoisting designed and manufactured a 5-ton aluminum alloy portable gantry crane for a customer in the Philippines. According to the[...]

    2 units of 10 ton portable gantry cranes sold to Chile in 2024

    Portable gantry crane Portable Gantry Crane Accessories Portable gantry crane procurement parameters In 2024, Dongqi Crane produced two 10-ton portable gantry cranes for a Chilean customer. This was t[...]

    2024 1 set of 1 ton portable gantry crane sold to Philippines

    Portable gantry crane procurement parameters In January 2024, we received a request from a Philippine customer to purchase a gantry crane. After careful communication, we determined the design of a po[...]

    Send Your Needs

      en_USEnglish