Foxconn Crane Application Cases

Nowadays, there are more and more crane applications. Gantry cranes and semi Gantry crane are one of the products that pursue mechanization and automation of the production process in modern industrial production and lifting transportation. Follow the editor of Taiguan to take a look at the Foxconn crane application case of Taiguan this time!
Collaborating unit: Foxconn
Cooperation time: September 2017
Product used: semi Gantry crane (single beam)

Foxconn is a manufacturer of electronic products, specializing in high-tech electronic products internationally. And all the products made by Foxconn are processed and produced by other brands according to customer requirements, and they are then handed over to customers after completion. So the finished product needs to be transported to the destination. In order to provide customers with a good experience and have certain requirements for cranes, Foxconn contacted the person in charge of Taiguan through a friend's introduction. After understanding the requirements, a dedicated production team was established to start preparing for the preliminary work.

The crown crane can not only complete transportation, but also provide us with a better experience through transportation. This is the evaluation given to us by Foxconn.

The single beam semi Gantry crane is one of the important tools and equipment to realize mechanization and automation of production process in modern industrial production and lifting transportation. Small semi Gantry crane are mostly used for lightweight lifting in indoor production workshops. They are designed by Gantry crane according to the needs of the site. Therefore, they are classified as Gantry crane.

Safety inspection specifications

For the safety inspection of semi Gantry crane, in order to ensure the normal operation of the crane, some routine safety inspections shall be carried out during the operation of the crane. The inspection items and key points are as follows:

(1) The performance of the lifting height limit device, travel limit switch, and various interlocking mechanisms is normal, safe, and reliable;

(2) All main components meet safety requirements: the increase in opening is less than 15% of the original size, and the torsional deformation is less than 10%; The wear of the plate hook bushing is less than 50% of the original size, and the wear of the plate hook spindle is less than 5%, without peeling, burrs, or welding repairs. There are no obvious defects on the hooks, hangers, and pulleys.