Home → Forum
LH electric hoist 1...
 
Notifications
Clear all

LH electric hoist 15 ton double-beam bridge crane for power plant is sold in Tanzania for 60000 yuan

0 Posts
1 Users
0 Likes
904 Views
0
Topic starter

This 15 ton overhead crane is in hot sale in Tanzania. The sales price is 60000 yuan. If you need such a 15-ton overhead crane in Tanzania, you can leave your contact information in the message.

Since the lifting equipment is a customized product with a wide variety, which cannot be displayed one by one, please inform us of the model, span, lifting height, running length, specific installation location and other technical parameters in the message below, and we will quote you after accounting.

(The specification, price, payment method and delivery date of the equipment are subject to the quotation!!)

Product Introduction

The electric hoist bridge crane depends on the direction of the power house track and the bridge_ The work is carried out by moving the trolley track and lifting the hook.

This product has two forms of ground and operation room operation. There are two types of operation room: open type and closed type. It can be divided into left or right installation according to the actual situation. There are three directions for entry: side, end and top. Users can make choices under different needs.

Working environment conditions of this series of products:

1) The power supply of the crane is three-phase four-wire AC, the frequency is 50Hz, and the voltage is 380V. The upper and lower limit of allowable voltage fluctuation on the motor and electrical control equipment is ± 10%, and the internal voltage drop of the crane is not more than 5%.

2) The installation of crane running rail shall meet the requirements of GB10183.

3) Cranes generally work indoors.

4) The grounding resistance of crane running rail shall not be greater than 4Q.

5) The height of the place where the crane is installed and used shall not be greater than 1000m.

6) There shall be no flammable, explosive, combustible dust and corrosive gas in the working environment.

7) The working ambient temperature is - 20 "C~+40" C, and the average temperature within 24h shall not exceed+35 ℃; Within 24h

Share:

Send Your Needs

    en_USEnglish