HomeNews → Double Girder EOT Crane Manufacturer Safety Regulations

Double Girder EOT Crane Manufacturer Safety Regulations

Double Girder EOT Crane Manufacturer requires safety rules must be followed:

1. There must have professionals to operate Double Girder EOT Crane.

Name plate shall be on one side of Double Girder EOT Crane that contains: SWL, span, working duty, Double Girder EOT Crane manufacturer, etc.

No people standing on Double Girder EOT Crane except in cabin during crane working.

Cut power when crane check or maintaining.

When hook is no load, it shall be at least 2.5 m above the ground.

Loads are not allowed upon people.

The lowest point of load shall be higher than the highest point of obstacles at least 0.5m.

Crane hook lifting or transportation People is not allowed.

No thrown from Double Girder EOT Crane.

Tools, spare parts, fasteners should be in special boxes, they are not allowed to be placed on Double Girder EOT Crane, to avoid dropping hurts or damage equipment.

When lifting expensive load or noxious liquid, no matter what weight it is, must first be slightly lifting the load of 150 ~ 200 mm from the ground, validate the brake reliability, then keep normal lifting work.

Combustibles are not allowed to be positioned on Double Girder EOT Crane, fire prevention should be considered.

Wind-force is more than class 6, stop using outdoor use Double Girder EOT Crane.

When outdoor use Double Girder EOT Crane stop work, or stopped the crane when wind-force is more than class 6, use rail clamp to fix the crane, avoid accident

Periodic (routine) inspection should be on Double Girder EOT Crane, include dynamic and static load test, and results should be kept.

2. Double Girder EOT Crane Manufacturer Develop Electrical components examine and repair regulations

Maintenance by electrical professionals only.

Use portable searchlight voltage no more than 36V when maintenance.

If working needs power on, rubber gloves and boots must be worn, use tools with insulated handles. Specially assigned person that monitoring switch and power must cut if emergency happens. All areas that are near to conductor parts should be enclosed.

About Double Girder EOT Crane Manufacturer Safety Regulations

Crane manufacturers Dongqi Group mainly supply overhead cranes, gantry cranes, eot cranes, bridge cranes, electric hoists, crane parts and related industrial cranes in China.

  Contact our crane specialists


Send us a message and we will get back to you as soon as possible.

    Send Your Needs

      en_USEnglish