Contents
EOT crane types:
Overhead crane types: Material handling is a vital component of any manufacturing system and the material handling industry is consequently active, dynamic, and competitive.
A crane is a mechanical lifting device equipped with a rope drum, wire rope, and sheaves that are used both to lift and lower materials and to move them horizontally.
It uses simple machines to create mechanical advantage which helps to move loads beyond the normal capability of a human. Cranes are commonly used in the transport industry, in the construction industry, and in the manufacturing industry.
The overhead cranes handle and transfer heavy loads from one position to another. Electric overhead traveling cranes are widely used in many industries for lifting the safe working load.
The escalating price of structural material is a global problem. Many small scale industries purchase the existing electric overhead cranes from bigger industries and make the required modification to suit their requirement.
Overhead crane types:
Various types of overhead cranes are used in industries with many being highly specialized. Various types of overhead cranes are single girder cranes, double girder cranes, gantry cranes, and monorails.
The crane consists of a single bridge girder supported on two end trucks. It has a trolley hoist mechanism that runs on the bottom flange of the bridge girder.
The crane consists of two bridge girders supported on two end trucks (end carriages). The trolley runs on rails on the top of the bridge girders. Double girder electric overhead cranes are widely used in the industries because they can carry more loads with more span than any other type of crane. In this project, we are concentrating mainly on double girder electric overhead cranes.
These cranes are essentially the same as the regular overhead cranes except that the bridge for carrying the trollies or trolleys is rigidly supported on two or more legs running on fixed rails or other runways. These “legs” eliminate the supporting runway and column system and connect to end trucks which run on a rail either embedded in or laid on top of, the floor.
For some applications such as production assembly lines or service lines, only a trolley hoist is required. The hoisting mechanism is similar to a single girder crane with a difference that the crane doesn’t have a movable bridge and the hoisting trolley runs on a fixed girder. Monorailbeams are usually I-beams (tapered beam flanges).
Monorail or repair trolley cranes are used for maintenance purpose.
For maintenance of any single or double girder crane, the crane which is to be taken for maintenance is brought under the repaired trolley (monorail) crane so that it can lift the components of the crane for repair or replacement.
The EOT in EOT Cranes stands for “Electric Overhead Travelling”. These types of overhead cranes are stationary and allow for lateral movement across two planes. Not only do they move backward and forwards but they can also move up and down with the load. These cranes are perfect for indoor work.
Factories, assembly lines, big warehouses, mining corporations, etc. can make good use of EOT cranes. Low maintenance and easy to operate make these cranes a good investment, especially if you have trained operators and experience the frequent need for heavy load lifting. The only thing to keep in mind is that they are not to be used in explosive and corrosive environments.
Here, the HOT in HOT Cranes stands for Hoist One Track. HOTs are a stationary overhead crane and allow for lateral movement across two planes as well. They are less common as compared to EOT cranes as they do not allow for as much movement as the EOT cranes.
They are more commonly used for maintenance purposes. They have a hoist attached to the bridge which can be operated using an electric pendant. They are low maintenance and a sound investment if you frequently need a lot of maintenance and repair in your enterprise.
Overhead bridge cranes are the most common models on the market. A bridge crane has two overhead runway beams that are linked to the support structure of the building. This crane comes in two configurations; single and double girder. The strength of a double and single girder bridge crane is almost the same. However, a double girder allows you to hoist a load higher than a single girder crane. Because a single girder is simpler, it is easier to install and cheaper than a double girder.
In a gantry crane, the girder stands on legs as opposed to being suspended on a support beam. The legs can be fitted underground or on the surface. Gantry cranes are suitable for outdoor use because they don’t require the girder to connect to a building’s support structure. If you need a crane in a shipyard, a gantry is the right kind of system.
A workstation crane is built for lightweight use in areas with space constraints. It’s a simple design that can lift between 150 pounds to 2 tons of material. Workstation overhead cranes are perfect for repetitive duties like moving packaged boxes in a warehouse. They are ergonomically-designed for regular use. (Overhead Crane Types)
Overhead crane types: Top running vs. under running cranes
When it comes to defining clear differences between bridge cranes, you will want to consider if you require a top running or under the running crane.
En una ejecución de la grúa, el puente corre sobre rieles a lo largo de la parte superior de la pista de vigas.
On an under-running, or underhung crane, the bridges are supported by the bottom of the runway beams and the wheels run along the bottom of the lower beam flange. (overhead crane types)
These cranes have no limiting capacity, meaning they can be built to go from small capacities to very large capacities. They include a rail installed on top of each runway, and the bridge wheels move on the rail instead of the bottom flange of the runway beam. These cranes are supported by the building structure or runway support columns, or sister columns, and are ideal for moving extremely heavy loads.
Often called “underhung,” because the crane wheels are supported by the bottom flange of the crane runway beams acting as the crane rail. These types of cranes can allow you to maximize your facility’s floor space for the production and storage of material because they are supported by the ceiling trusses or the roof structure. Or, they can be designed to utilize an existing support structure (if adequate), or run on a newly-engineered support structure.
Overhead crane types: Electric overhead crane comparison:
To move extremely heavy or bulky loads through the overhead space in a facility, instead of through aisles or on the floor, an overhead crane (also called an industrial crane, crane, or overhead traveling crane is a machine that lifts, lowers, and moves a load horizontally.
Overhead Crane Working Principle system consists of three working movements: crane hook up and down lifting, trolley lateral movement, and crane long traveling longitudinal motion.
A gantry crane is slightly different from a bridge crane. The general premise is the same, but the operation is different. Some gantry cranes ride along a track installed on the floor or use a V-groove caster to keep moving in a straight line. Gantry cranes are usually less expensive than an overhead bridge crane.
EOT (Electronic overhead traveling) crane is essential industrial equipment involved in the material handling job. Overhead EOT single girder cranes are used to lift the objects by a hoist fitted in a trolley. It comes under standard crane types.
Spanish 
English 
Japanese 
French 
Indonesian 
Thai 
Russian 
Vietnamese 
Arabic