InicioGrúa de arriba → Double Girder EOT Crane Specification Design - Use Environment

Double Girder EOT Crane Specification Design - Use Environment

De La Viga Doble EOT de la Grúa Specification Design is applicable to all kinds of working condition places for materials handling, equipment installation and maintenance. It is extensive general use hoisting equipment. Double Girder EOT de la Grúa can be customized for various conditions with explosion-proof, insulation and other special functions working places.

  1.  Double Girder EOT Crane power supply is 220v - 660v, 3-phrase, 50/60Hz. Allowed voltage fluctuation in motor and electrical equipment upper limit is +10% of rated voltage, lower limit is -15% of rated voltage.
  2.  The altitude of Double Girder EOT Crane operating place should be less than 2000m (if above 1000m, need check the motor capacity).
  3.  Double Girder EOT Crane operational environment should not have flammable, explosive and corrosive gas.
  4.  Radiant temperature that lifting objects radiating Double Girder EOT Gancho de la grúa must be less than 300℃.
  5.  Outdoor use Double Girder EOT Crane max. wind pressure under off working condition is 800Pa (equal to 11 degree wind, 28.5-32.6m/s)
  6.  Double Girder EOT Crane normal use weather conditions

1) Double Girder EOT Crane indoor use

  • Ambient temperature ≤+40℃, average temperature ≤+35℃ during 24 hours.
  • Ambient temperature ≥-5℃.
  • Under the condition of temperature +40℃, relative humidity can not be above 50%.

2) Double Girder EOT Crane outdoor use

  • Ambient temperature ≤+40℃, average temperature ≤+35℃ during 24 hours.
  • Ambient temperature ≥-25℃
  • When ambient temperature ≤+25℃, relative humidity allow to be 100% temporarily.
  • Working wind pressure can not be above: inland 150Pa (equal to 6 degree wind, 10.8-13.8m/s), inshore 250Pa (equal to 7 degree wind, 13.9-17.1m/s).

De la Viga doble EOT de la Grúa de la Especificación

Cómo personalizar la Viga Doble EOT Grúa de China

Somos un fabricante de grúas encuentra en China, proporcionando grúa servicios de personalización global de la grúa clientes. Si desea personalizar una Viga Doble EOT de la Grúa, usted puede dejar un mensaje en el sitio web o Correo electrónico: sales010@cranesdq.com, nos diga la siguiente información, y nuestro gerente de ventas se pondrá en contacto con usted:

  • Capacidad de elevación (ton): __ ?( La capacidad nominal)
  • Altura de elevación (m):__ ? (Altura de gancho de centro para la planta)
  • Span (m): __ ? (La distancia entre el centro del ferrocarril)
  • Velocidad de elevación (m/min): __ ? ( Simple, Doble, Variable)
  • La distancia de desplazamiento (m): __ ? (La longitud del carril)
  • El trabajo deber: __ ? (¿Cuántas horas al día? Cuántas veces en una hora?)
  • ¿De qué material a ser levantado: __ ?
  • Industrial de tensión: __ ? ( como :380V, 50Hz, 3ph )

Deja un comentario

Protegido con Lista Negra de IP en la NubeLista Negra de IP en la Nube

Enviar A Tus Necesidades

    es_ESSpanish
    %d