Can the LDA single-beam crane be equipped with two electric hoists?

Some customers asked our factory, can a single beam crane use two electric hoists? The answer is yes.

The LDA single-beam crane is a lifting equipment that is used more in the production of enterprises. The crane uses an electric hoist as the lifting mechanism. Due to production reasons, some customers need to use two electric hoists to work together. Can a single beam crane use two electric hoists? sure. But when using a double electric hoist single beam crane, you need to pay attention to the following points:

1.  If the tonnage of a single beam crane is more than 1 ton, it must be modified by a manufacturer with relevant qualifications and cannot be modified privately.
2.  The total lifting weight of the two electric hoists cannot exceed the maximum load-bearing capacity of the single-beam crane. That is to say, if the tonnage of the single-beam crane is 5T, the total tonnage of the two electric hoists cannot exceed 5 tons.
3.  When operating a single-beam crane , if the crane lifts a long thing, you can consider using a controller for control. The two electric hoists can act simultaneously or separately.
4.  You can consider using a sliding contact wire to supply power to the electric hoist, which is more convenient, and you can also consider the way of separate power supply.
5.  If the operating range of two electric hoists is far away, you can use the travel switch to control the travel range of the electric hoist. If the distance is relatively close, you must use an anti-collision device to avoid collisions between the two electric hoists or lifting objects.

To purchase a single-beam crane, you need to choose according to the user's site conditions and use needs. If you have any questions, you can communicate with the editor. Yuzheng crane manufacturers are happy to provide you with reasonable product solutions.