Wire rope electric hoists are mainly used in electric single-beam cranes, electric suspension cranes, hoist gantry cranes, monorail cranes and other lifting equipment, suspended under the I-beam running track. The editor of our factory introduces common faults and solutions of electric hoists.
The electric hoist should be repaired in time if there is a problem
There are dirt such as oil and water on the track surface such as I-beam or the wheel tread. At this time, it is necessary to remove the dirt on the track surface or the wheel tread.
①The flange surface of the supporting wheel such as I-beam is irregular
②The manufacturing and assembly accuracy of the running car is poor, and the three-leg phenomenon is serious.
Solution at this time:
① Perform flame repair
②Inspect and trim according to the requirements of manufacturing and assembly accuracy.
①The rail end stop (stopper) or buffer is asymmetrical
②The active and passive weights of the running trolley are unbalanced, causing the passive side, causing the wheels of the passive side to wing up and climbing the track.
Solution:
①Re-adjust (or trim) the stop or buffer to a symmetrical structure.
②Add counterweight on the passive side.
Contactez nos spécialistes de la grue
Envoyez-nous un message et nous reviendrons vers vous dès que possible.
French 
English 
Spanish 
Japanese 
Indonesian 
Thai 
Russian 
Vietnamese 
Arabic