Double Girder EOT Crane Specification Design - Electrical Parts

Table des matières

1. Double Girder EOT Crane Power supply system:

Power supply: 220V - 660V, three phase current, three-wire
Driving power supply: 220V - 660V,
Control power supply: 24 VAC, 36 VAC, 220VAC
Safety lighting power supply: 24 VAC, 36 VAC
Maintenance Power Supply: 220V - 660V

2. Double Girder EOT Crane Electrical control system

Main electrical components use Schneider.
Emergency stop: Emergency stop button is arranged on the operating table and the general control panel of the electric room, when the operator has accident or the equipment failure, press the emergency stop button, the whole crane driving power and control power are cut off.
Driver’s cabin using linkage control with zero self-locking, the linkage table must have clear power indicator and work indicator.
Setting overload limiter, when lifting loads reach 90% of rated lifting capacity, alarming; reaching 105%, hoisting is prohibited.
Control cabinet (panel) should have steady mounting base, to prevent vibration; control cabinet (panel) using front wiring; PVC wiring duct should be smooth, no glitches, and ground insulation skin, wire cable must be protected by the wire duct exit.

3. Double Girder EOT Crane Lighting system

Driver’s Cabin lighting: 20W fluorescent light
Under the main beam lighting: 2 halogen lamps
Overhaul socket: set 220V - 660V, 36V socket in the following parts: Driver’s Cabin 220V - 660V, 36V 2pcs;
Main beam 220V - 660V, 36V 3pcs

4. Double Girder EOT Crane Other parts

Ensure maintenance space
Cross traveling cable select pull resistant flexible cable, located terminal box at both ends of the cable; terminal box adopt bakelite board mounted brass screws as terminals.
Wire cable laying on bridge frame, power, control, lighting and auxiliary circuits are all independent.

All double girder EOT crane using driver’s cabin and wireless remote control, single girder crane using ground pedant and wireless remote control.

Double Poutre EOT Grue Spécification

Comment personnaliser Double Poutre EOT Grue de Chine

Nous sommes un fabricant de la grue située en Chine, fournissant grue de personnalisation de services aux clients de grues. Si vous souhaitez personnaliser un Double Poutre EOT Grue, vous pouvez laisser un message sur le site ou E-mail: sales010@cranesdq.com, dites-nous les informations suivantes, et notre directeur des ventes communiquera avec vous:

Capacité de levage (t): __ ?( La capacité nominale)
Hauteur de levage (m):__ ? (Hauteur à partir du crochet centre à l'étage)
Span (m): __ ? (La Distance entre le rail du centre)
Vitesse de levage (m/min): __ ? ( Simple, Double, Variable)
Voyager distance (m): __ ? (La longueur du rail)
Travail duty: __ ? (Combien d'heures par jour? Combien de fois par heure?)
Quel matériel pour être soulevé: __ ?
Industriel de tension: __ ? ( comme :380V, 50Hz, 3ph )

Partager sur Facebook

Enregistrer

Les Vues Post: 1 365

Contactez nos spécialistes de la grue

Envoyez-nous un message et nous reviendrons vers vous dès que possible.