HomeHoist → 20t Electric Winch for sale to Chile

20t Electric Winch for sale to Chile

We completed an order for a set of 20t Kerekan Listrik dari Chili. The winch was sent from Qingdao, China, to Valparaíso, Chile. The winch of this order is JM electric winch. The JM electric construction winch is a slow speed winch. There are many models of this electric winch, and the large tonnage winch also supports customization. The working principle of the winch The motor drives the wire rope drum through the reducer, retracts and unwinds the wire rope, and changes the direction through different pulleys. The technical requirements are mainly the speed of the drum, that is, the movement speed of the wire rope and the safety and reliability of the braking system. The winch is a relatively simple lifting or traction machine. Because it is used on the construction site for a long time, it is necessary to understand the performance and model in detail before using it

JM Electric Winch parameters

  • Capacity=20t
  • Rope length=50m
  • 380V 50Hz 3 phase
  • Kontrol liontin

Catatan:

  • Our offer includes supply of complete winch.
  • Installation, commissioning & site testing: not

Technical information

Rated capacity t 20
Rope capacity m 50
Rope diameter mm 48
Kecepatan m / mnt 10
Kelas pekerja   / A3
Catu daya   V / Hz / Ph 380V 50Hz 3Ph
Metode kontrol / Kontrol liontin
Motor power KW 45
Kelas perlindungan / IP54
Insulation grade / F
Suhu kerja / -20℃-+40℃
Negara asal / Cina

Pictures of this Electric Winch for reference

20t Electric Winch 20t Electric Winch

Electric Winch Processing

Electric Winch Processing

Electric Winch Package and Delivery

Electric Winch Package and Delivery

Standar Teknis

Aturan Desain dan Konstruksi

Semua standar yang diperlukan untuk derek adalah standar FEM, standar DIN, dan standar Nasional China.

Standar Nasional Utama Eropa

-- 89/392/EEC standard (93/68/EEC)

-- 91/368/EEC standard

-- 73/23/CEE standard

-- "EMC" standard 89/336/EEC

-- EN 60204-1

-- EN 292 mechanical safety

-- ISO 2141

-- ISO 2766

Standar Internasional

-- 9 Juni 1993 / Sept. 22. pemberitahuan tahun 1993

-- Pemberitahuan 29 Juli 1992, 92-765, 92-766, 92-767

-- DIN 5684

-- DIN 15400; DIN 15401

-- NFE 26-010

-- NFE 26-030

Standar Teknis

-- Grup mekanik FEM 9.511

-- FEM 9.661 Mengangkat dan memindahkan komponen ukuran dan standar kualitas

-- Standar kualitas tali kawat FEM 9.671

-- Pilihan motor travel FEM 9.681

-- FEM 9.682 Pilihan motor pengangkat

-- Peralatan pengangkat listrik FEM 9.755

-- Standar derek listrik FEM 9.811

-- Referensi desain komponen pengangkat FEM 9.901

-- IEC 34-1 Kinerja perjalanan dan alokasi

-- Standar tingkat perlindungan IEC 34-5

-- Peralatan tegangan rendah IEC 947-5-1

Standar Nasional Utama China

Aturan desain untuk derek GB / T 3811-2008

Aturan keselamatan untuk peralatan pengangkat GB 6067-2010

Kondisi teknis derek umum GB 7592-87

Derek-Derek perjalanan di atas kepala dan derek jembatan portal

toleransi untuk pembuatan dan peletakan trek GB/T 10183-2010

Kode dan prosedur uji derek GB / T 5905-2011

Derek Jembatan umum GB/T 14405-2011

Portal Crane GB / T 14406-2011

Kinerja Teknis Peralatan Derek & Angkat dan Kondisi Penerimaan GB/T 17908-1999

Instalasi listrik dan standar penerimaan GBJ 232-82

Keselamatan Mesin-Peralatan Listrik Mesin

Bagian 32: Persyaratan untuk mesin pengangkat GB 5226.2-2002

Instalasi listrik dan standar penerimaan GB 50256-96

  Hubungi spesialis crane kami


Kirimi kami pesan dan kami akan menghubungi Anda kembali sesegera mungkin.

    Kirimkan Kebutuhan Anda

      id_IDIndonesian