5 Ton Double Girder EOT Crane Specification Design - Use Environment

Table of Contents

5 Ton Double Girder EOT Crane Specification Design is applicable to all kinds of working condition places for materials handling, equipment installation and maintenance. It is extensive general use hoisting equipment. 5 Ton Double Girder EOT Crane can be customized for various conditions with explosion-proof, insulation and other special functions working places.

5 Ton Double Girder EOT Crane power supply is 220v - 660v, 3-phrase, 50/60Hz. Allowed voltage fluctuation in motor and electrical equipment upper limit is +10% of rated voltage, lower limit is -15% of rated voltage.
The altitude of 5 Ton Double Girder EOT Crane operating place should be less than 2000m (if above 1000m, need check the motor capacity).
5 Ton Double Girder EOT Crane operational environment should not have flammable, explosive and corrosive gas.
Radiant temperature that lifting objects radiating 5 Ton Double Girder EOT Crane hook must be less than 300℃.
Outdoor use 5 Ton Double Girder EOT Crane max. wind pressure under off working condition is 800Pa (equal to 11 degree wind, 28.5-32.6m/s)
5 Ton Double Girder EOT Crane normal use weather conditions

1) 5 Ton Double Girder EOT Crane indoor use

Ambient temperature ≤+40℃, average temperature ≤+35℃ during 24 hours.
Ambient temperature ≥-5℃.
Under the condition of temperature +40℃, relative humidity can not be above 50%.

2) 5 Ton Double Girder EOT Crane outdoor use

Ambient temperature ≤+40℃, average temperature ≤+35℃ during 24 hours.
Ambient temperature ≥-25℃
When ambient temperature ≤+25℃, relative humidity allow to be 100% temporarily.
Working wind pressure can not be above: inland 150Pa (equal to 6 degree wind, 10.8-13.8m/s), inshore 250Pa (equal to 7 degree wind, 13.9-17.1m/s).

About 5 Ton Double Girder EOT Crane Use Environment

When using a 5 ton Double Girder EOT Crane, the operator needs to pay attention to the following environment.

Flammable, explosive, and corrosive gases are not allowed to appear in the environment where the crane is operated.
Before operating a double beam bridge crane, it is necessary to inspect the surrounding environment to ensure that there are no obstacles or other potential hazards.
When lifting items, it is necessary to pay attention to their weight and lifting method to ensure that they can be safely lifted and transported.
When using a double beam bridge crane, it is necessary to pay attention to the physical parameters related to the lifting of items, such as the size, weight, density, and working radius and height of the operating environment.
Ensure the normal working status of the double beam bridge crane and avoid dangerous operations such as overloading, diagonal pulling, and hook unlocking.
When operating a double beam bridge crane, it is necessary to wear appropriate protective equipment such as work clothes and safety helmets to ensure the safety of the operators.
When operating a double beam bridge crane, it is necessary to always maintain attention and avoid safety accidents.
After completing the lifting operation, it is necessary to reset the hook and lifting gear, and turn off the main power supply of the crane to ensure that there is no accidental start of the crane.

Spesifikasi Derek EOT Girder Ganda

Cara menyesuaikan Derek EOT Girder Ganda dari China

Kami adalah produsen derek yang berlokasi di Cina, menyediakan layanan penyesuaian derek kepada pelanggan derek global. Jika Anda ingin menyesuaikan Derek EOT Gelagar Ganda, Anda dapat meninggalkan pesan di situs web atau Email: sales010@cranesdq.com, beri tahu kami informasi berikut, dan manajer penjualan kami akan menghubungi Anda: