Rumah → News

How to repair and adjust bridge crane gnawing rail

Rail gnawing by bridge cranes is a serious problem. The main reasons for rail gnawing are track problems, wheel problems, and bridge deformation. When the bridge crane has a rail gnawing problem, it m[…]

Metode menstabilkan pengait dalam operasi praktis derek jembatan

Crane steady hook is also called chase hook. The operation method of making the swinging hook stop at the required position or making the lifting object move smoothly with the crane is called stable h[…]

Standard Specification for Track Installation of Single Girder Bridge Crane in Industrial Plant

The installation of the crane track in the industrial plant is related to the normal operation of the single-beam bridge crane . If there is a problem with the track installation, it is easy to cause […]

Scrap standards and inspection requirements for single-girder crane tracks

The track is the basis for the operation of a single-girder crane . It needs to bear the wheel pressure of the crane wheel and guide the wheel to run. If the track is severely damaged, it needs to be […]

How to install crane cable for gantry crane

If the gantry crane and the loading and unloading bridge carts are powered by cables, the fixed point of the cable on the ground should preferably be at the midpoint of the cart’s travel as the orig[…]

Lifting height of general crane

The lifting height of the crane is generally calculated from the ground of the work site (the crane is not supported on the ground rail) or from the top surface of the crane’s ground running tra[…]

The process of changing the span of bridge crane from large to small

What is the span of a bridge crane? Bridge crane span: The distance between the two track centerlines of the bridge crane running track is called the span of the crane. Denoted as: L. The unit is gene[…]

Overhead crane driver handover system

In order to ensure the safe and normal operation of cranes, enterprises using bridge cranes must improve the relevant crane management system and develop a shift system for bridge crane drivers. The e[…]

What are the inspection items of the periodic self-inspection report of the bridge gantry crane

In order to ensure the safe use of bridge gantry cranes, relevant national departments stipulate that bridge gantry cranes of more than 3 tons must be submitted for inspection on a regular basis . The[…]

What are the differences between metallurgical cranes and ordinary cranes

Metallurgical cranes refer to bridge cranes used in metallurgy, casting and other places where molten metal is lifted. It can be divided into metallurgical single-beam cranes and metallurgical double-[…]

Kirimkan Kebutuhan Anda

    id_IDIndonesian