Grab is a commonly used spreader used with cranes, mainly used for grabbing bulk materials. There are many types of grabs according to different shapes, power sources and use occasions. The editor introduces the classification and application of the crane grab.
The double-cable multi-petal grab can be used to grab bulky or irregularly shaped bulk materials. The bucket flap has good wear resistance, high strength, and good penetration when grabbing materials. The grab has a wide range of uses and can be used with tower cranes, Ship cranes, gantry cranes and other cranes grab bulk materials such as garbage, rocks, and scrap steel.
Maximum lifting weight of conventional grab: 5.0t～40t
Range of grabbing bulk cargo proportion: 0.5t/m3～3.0t/m3
The four-rope multi-leaf grab can be used to grab bulky or irregularly shaped bulk materials like the double-cable multi-leaf grab. The bucket has good wear resistance, high strength, and good penetration when grabbing materials. The bucket has a wide range of uses, and can be used with various cranes such as tower cranes, ship cranes, and gantry cranes to grab garbage, stones, scrap steel and other massive materials.
Maximum lifting weight of conventional grab: 5.0t～40t
Range of grabbing bulk cargo proportion: 0.5t/m3～3.0t/m3
The double rope double flap grab can be used to grab all kinds of powder and granular bulk materials. The grab bucket adopts a single-twisted shaft bucket body design, the overall structure design is light, the grabbing ratio is large, the closing force is strong, the material filling rate is high, and the dust cover can be designed for the grab according to environmental protection requirements, maritime environment and other special working conditions. ﹑Various cutting edge seals and low-maintenance or maintenance-free structure of hinge point, etc. It is usually used with various types of cranes such as tower cranes, ship cranes, and ship unloaders, and is widely used in docks, steel plants, power plants, ships and other occasions.
Maximum lifting weight of conventional grab: 5.0t～64t
Range of grabbing bulk cargo proportion: 0.8t/m3～3.0t/m3
Grab all kinds of powder and granular bulk materials. The grab bucket adopts a single-twisted shaft bucket body design, the overall structure design is light, the grabbing ratio is large, the closing force is strong, the material filling rate is high, and the dust cover can be designed for the grab according to environmental protection requirements, maritime environment and other special working conditions. ﹑Various cutting edge seals and low-maintenance or maintenance-free structure of hinge point, etc. It is usually used with various types of cranes such as tower cranes, ship cranes, and ship unloaders, and is widely used in docks, steel plants, power plants, ships and other occasions.
Maximum lifting weight of conventional grab: 5.0t～64t
Range of grabbing bulk cargo proportion: 0.8t/m3～3.0t/m3
The double rope timber grab is specially used to grab logs of various specifications. It can be grabbed by a single root or multiple roots. It can be used with cranes such as tower cranes and gantry cranes. It is suitable for occasions such as log storage yard and dock unloading. Maximum lifting weight: 5.0t～32t
The four-rope timber grab crane can be used to grab logs of various specifications. It can grab a single root or multiple roots. It can be used with cranes such as tower cranes and gantry cranes. It is suitable for occasions such as log storage yard and dock unloading.
Maximum lifting weight of conventional grab: 5.0t～32t
The electro-hydraulic double flap grab can be used to grab powder and granular bulk materials (such as fertilizer, grain, coal, coke, ore, yellow sand, granular building materials and gravel and other bulk materials), and has been widely used For docks, steel mills, power plants, ships, garbage incineration plants and other occasions, it can be used with various types of cranes such as tower cranes, ship cranes, ship unloaders and bridge cranes. For grabs that operate in a corrosive environment for a long time, the pins of each hinge fulcrum are treated with high-performance anti-corrosion treatment to ensure the reliability of the pin shafts for a long time.
Conventional grab bucket capacity: 0.8m3～26.0m3
Matching motor power: 8.5kw～55kw
The electro-hydraulic multi-part grab can be used to grab bulk, granular and irregularly shaped bulk materials (such as coke, pig iron, scrap, slag, garbage, stones and other bulk materials). The electro-hydraulic multi-part grab The bucket can be directly connected with the hook, the connection method is simple and convenient, the grasping efficiency is high, and the working performance is stable. It is widely used in docks, steel plants, garbage incineration plants and other occasions. It can be used with tower cranes, ship unloaders and bridge cranes. Various types of cranes.
Conventional grab bucket capacity: 0.8m3～20m3
Matching motor power: 8.5kw～55kw
The electro-hydraulic rectangular grab is used to grab bulk, granular and irregular bulk materials (such as coke, pig iron, scrap steel, slag and other bulk materials). Especially suitable for bulk cargo loading and unloading operations in the carriage. It is widely used in docks, steel mills and other places, and can be used with various types of cranes such as tower cranes, ship unloaders and traveling vehicles.
Conventional grab bucket capacity: 2.0m3～4.0m3
Matching motor power: 28kw～45kw
The electric hydraulic timber grab is suitable for grabbing all kinds of bundles of logs (MHG type) or single logs (MBG type). It is widely used in docks, forest farms, wood processing raw materials storage yards and other places. It can be used with tower cranes and traveling vehicles. Various types of cranes.
Grab cross-sectional area: 0.4㎡～2.0㎡
Motor power: 2.2kw～22kw
Diameter of round logs grabbed by grabbing bucket: Ф700mm～Ф2200mm
Motor power: 2.2kw～8.5kw
The hydraulic double flap grab can be used to grab powder and granular bulk materials. It can be configured for use on hydraulic excavators with flexible mobility.
Conventional bucket capacity: 0.1m3～3.0m3
Lifting capacity: ≤10t
The hydraulic multi-part grab is used to grab bulk or irregular bulk materials (such as coke, scrap steel, slag, garbage and other bulk materials).
Conventional grab bucket capacity: 0.12m3～2.0m3
Suitable for lifting capacity: ≤10t
Applicable occasions: grab all kinds of round logs, which can be used in docks, forest farms, wood processing raw materials storage yards and other places.
Grab cross-sectional area: 0.4m2～2.5m2
Lifting capacity: ≤10t
Applicable occasions: The eight-rope double flap grab is mainly suitable for grabbing bulk materials (such as coal, ore) in bulk, granular and irregular shapes, and can be used with various types of cranes such as tower cranes, ship cranes, ship unloaders and traveling vehicles. .
Lifting capacity range: 92t, dead weight: 42t
Range of grabbing bulk cargo proportion: 0.8t/m3～3.0t/m3
A special grab bucket for underwater dredging operations matched with crane ships. According to the lifting form of the supporting crane, it is divided into four rope, double rope mechanical form and hydraulic transmission form. According to the different underwater working conditions, it is divided into:
1) Double flap grab for dredging, dredging or catching pebbles
2) Heavy-duty grab for excavating clay, gravel and slab soil
3) Giant fishing grab for fishing and grabbing large stones
The radio remote control grab is a bulk grab that applies radio remote control technology to a single rope grab. It is often used with single hook cranes. It solves the difficulty of single rope grabs with low work efficiency and high operating strength. It is especially suitable for single hooks. Model cranes and marine cranes are reliable and easy to operate. Using radio control, it can open a bucket to unload at any position in the air.
The container spreader utilizes ingenious mechanical mechanism to realize the automatic unlocking and locking of the container spreader without manual operation, which greatly improves the work efficiency and can conveniently lift standard 20-foot and 40-foot containers.
The rotary hydraulic spreader is specially designed for gantry cranes, bridge cranes, floating cranes and portal cranes. Suitable for ISO standard 20-foot and 40-foot container loading and unloading operations, with a rated lifting weight of 30.5 tons. The container spreader is driven by a hydraulic system. It is a kind of container spreader with high degree of automation and operation efficiency. It has the function of rotating the container position by itself. It is especially suitable for occasions that require high container rotation operations and high loading and unloading speeds.
When enterprises purchase grab cranes, they must choose the appropriate grab type and model. Welcome to consult us.
Hubungi spesialis crane kami
Kirimi kami pesan dan kami akan menghubungi Anda kembali sesegera mungkin.
Indonesian 
English 
Spanish 
Japanese 
French 
Thai 
Russian 
Vietnamese 
Arabic