HomeOverhead crane → Double Girder EOT Crane Specification Design - Use Environment

Double Girder EOT Crane Specification Design - Use Environment

Girder Ganda EOT Crane Specification Design is applicable to all kinds of working condition places for materials handling, equipment installation and maintenance. It is extensive general use hoisting equipment. Double Girder EOT Crane can be customized for various conditions with explosion-proof, insulation and other special functions working places.

  1.  Double Girder EOT Crane power supply is 220v - 660v, 3-phrase, 50/60Hz. Allowed voltage fluctuation in motor and electrical equipment upper limit is +10% of rated voltage, lower limit is -15% of rated voltage.
  2.  The altitude of Double Girder EOT Crane operating place should be less than 2000m (if above 1000m, need check the motor capacity).
  3.  Double Girder EOT Crane operational environment should not have flammable, explosive and corrosive gas.
  4.  Radiant temperature that lifting objects radiating Double Girder EOT Crane hook must be less than 300℃.
  5.  Outdoor use Double Girder EOT Crane max. wind pressure under off working condition is 800Pa (equal to 11 degree wind, 28.5-32.6m/s)
  6.  Double Girder EOT Crane normal use weather conditions

1) Double Girder EOT Crane indoor use

  • Ambient temperature ≤+40℃, average temperature ≤+35℃ during 24 hours.
  • Ambient temperature ≥-5℃.
  • Under the condition of temperature +40℃, relative humidity can not be above 50%.

2) Double Girder EOT Crane outdoor use

  • Ambient temperature ≤+40℃, average temperature ≤+35℃ during 24 hours.
  • Ambient temperature ≥-25℃
  • When ambient temperature ≤+25℃, relative humidity allow to be 100% temporarily.
  • Working wind pressure can not be above: inland 150Pa (equal to 6 degree wind, 10.8-13.8m/s), inshore 250Pa (equal to 7 degree wind, 13.9-17.1m/s).

Spesifikasi Derek EOT Girder Ganda

Cara menyesuaikan Derek EOT Girder Ganda dari China

Kami adalah produsen derek yang berlokasi di Cina, menyediakan layanan penyesuaian derek kepada pelanggan derek global. Jika Anda ingin menyesuaikan Derek EOT Gelagar Ganda, Anda dapat meninggalkan pesan di situs web atau Email: sales010@cranesdq.com, beri tahu kami informasi berikut, dan manajer penjualan kami akan menghubungi Anda:

  • Kapasitas angkat (ton):__?(Kapasitas terukur)
  • Tinggi angkat (m):__? (Tinggi dari pusat pengait ke lantai)
  • Rentang (m):__? (Jarak antara pusat rel)
  • Kecepatan angkat (m / mnt):__? (Tunggal, Ganda, Variabel)
  • Jarak tempuh (m):__? (Panjang rel)
  • Tugas kerja:__? (Berapa jam sehari? Berapa kali dalam satu jam?)
  • Bahan apa yang akan diangkat:__?
  • Tegangan industri:__? ( seperti: 380V, 50Hz, 3ph )

Leave a Reply

Dilindungi dengan Cloud Daftar Hitam IPCloud Daftar Hitam IP

Kirimkan Kebutuhan Anda

    id_IDIndonesian
    %d