The use and maintenance of the crane during the running-in period

When we buy vehicles, there will be a run-in period, and crane equipment will also have a run-in period. During the running-in period of the crane, everyone should pay attention to the maintenance of the crane to avoid problems such as poor lubrication, fast wear, and loose connecting pieces. The use and maintenance of bridge cranes and gantry cranes during the running-in period can be summarized into several items such as strengthening training, reducing load, paying attention to inspection, and strengthening lubrication.

1. The crane operators arranged by the enterprise should receive training and guidance, have a full understanding of the structure and performance of the crane, and obtain certain operation and maintenance experience before operating the machine independently. Be sure to read the operation and maintenance manual before operating the crane, and perform operation and maintenance according to the requirements of the manual.

2. Pay attention to the various instruments of the equipment, and find abnormalities, stop the machine in time to check and eliminate the fault, and stop the operation before the cause is not found and the fault is not eliminated.

3. Pay attention to the working load during the running-in period. Generally, the working load during the running-in period should not exceed 80% of the rated working load, and pay attention to arrange the appropriate workload to prevent the machine from overheating caused by continuous operation for a long time.

4. Keep the machine clean, adjust and tighten loose parts in time to prevent the loose parts from aggravating the wear of the parts or causing the parts to be lost.

5. Frequently check the level and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water). Excessive shortage of oil and water was found during the inspection, and the cause should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point during the running-in period (except for special requirements).

6. At the end of the running-in period, the machine should be maintained compulsorily, inspection and adjustment should be done, and attention should be paid to the replacement of oil.

Enterprises focus on running and maintenance of the crane, and can extend the life of the components of the machinery, reducing costs

Bagikan di Facebook

Tweet di

Ikuti kami

Simpan