ホーム → News

Maintenance of bridge crane

Check the number and model of the components on the bridge crane, carry out targeted quality inspections on the components according to the plan and specifications, including whether the strength and [...]

Machining of double-beam bridge crane wheels

Wheels are an important part of double beam bridge cranes. The outer ring of the wheel tread, the shaft hole and the bearing hole are all machined. The control accuracy is directly related to the stab[...]

Braking device of bridge crane

In order to meet the work needs of various bridge cranes and ensure safe driving, reliable mechanical brakes should be installed on all bridge cranes. In the various mechanisms of the crane, the main [...]

Overhead crane electrical control system

The electrical control system of the bridge crane is an electrical control product. Generally used under special working conditions, most of the installation positions vibrate greatly. During the oper[...]

Permanent magnet bridge crane

The mechanism of the bridge crane is generally driven and braked by a motor, a reducer, and a brake. The motor speed is high, and the direct output torque is small, so the motor and the working mechan[...]

Performing Maintenance on an Overhead Crane

Plant managers and maintenance personnel need to establish a preventative maintenance program for their overhead crane based on the recommendations of the crane manufacturer. Each manufacturer has the[...]

Inspection of Cranes not in Regular Use

If you have an overhead crane that has been idle for a length of time due to shutdown or storage, or you have a standby crane with infrequent or irregular usage, the crane needs to be inspected before[...]

Inspection Items for Overhead Cranes in Regular Service

The inspection procedure for cranes in regular service (operating at least one time per month) is divided into two general classifications based upon the intervals at which inspection occurs. The inte[...]

Overhead Crane Inspection Frequencies

Many maintenance supervisors and plant managers mistakenly think that they are in compliance with inspection standards if they have their crane equipment inspected once a year. This misconception can [...]

Overhead Crane Electrification via Cable Reels

Another type of crane electrification method involves the use of a cable reel—either spring-loaded or motor-driven—to release, retrieve, and store conductor cable for crane equipment. A reel with [...]

送ニーズに

    jaJapanese