ホーム → News

What is the function of safety hook of overhead crane?

Safe hook is an important part of bridge overhead crane. What are functions and types of safe hook?Safety hook is mainly used for single girder overhead crane. Lifting material at one side of main gir[...]

How does anti-deflection device protect overhead cranes?

It includes wire-rope type, cam type, chain wheel type and skew indicator and other automatic adjustable devices. When the bridge frame deflects to some degree, it can give signal to the operator and [...]

What is the anti-collision device on overhead cranes?

It mainly includes laser type, ultrasonic type, infrared type, electromagnetic type, all use the principle that light or radio wave travels, reflects and the distance can be measured. When two overhea[...]

Why overhead crane system need buffers?

Three kinds of buffers are used widely, spring buffer, rubber buffer and hydraulic buffer. Spring buffer is reliable and convenient to maintain. Rubber buffer has simple structure. Hydraulic buffer ca[...]

What to do when the brake is too hot, the friction plate wears fast.

The braking-shoe is loose, it doesn't break off the braking-wheel totally, and causes friction. The gap between two braking-shoe and braking-wheel is not even, or the gap is too narrow. The assistant-[...]

What to do when the brake can't stop the braking-wheel?

The reasons are as following: the leverage hinge is stuck, braking-wheel and friction plate have oil pollution, electromagnetic core doesn't have enough travelling distance, braking-wheel and friction[...]

What are the factors which influences overhead crane working speed?

Overhead crane working speed includes lifting speed, trolley travelling speed, overhead crane travelling speed. Working speed is influenced by many factors. First, it is related to the weight. The ove[...]

What to do when the overhead crane trolley line shakes seriously?

The reason is that fork can't absorb the transmission error, guiding-rail has poor straightness, and lifting rack is loose. The right way is to modify tractor, adjust the straightness of guiding-rail,[...]

What to do when the guiding rail is deformation, the collector doesn't work?

The main reason is the temperature is too high, the distance between lifting racks is too long or loose. It is useful to adopt anti-heat plate partially, add sun shield outdoors, increase the number o[...]

What to do when the overhead crane trolley line is out of power ?

The reason is that electric brush climbs in the conductor, the brush wears seriously, conductor joint is not smooth, single connector is used, rail joint becomes loose. The correct way is to check whe[...]

送ニーズに

    jaJapanese