As professional overhead crane manufacturer and supplier, Dongqiクレーン is able to provide your complete overhead crane services from overhead crane design to maintenance, etc. Dongqi overhead crane installation service from Dongqi can ease you from any overhead crane installation problems.
After purchasing your overhead crane, the next important thing is to install it correctly and safely. With its expertise and experiences in overhead crane installation and erection, Dongqi Crane provides crane installation service for our overhead cranes and those produced by other material handling equipment manufacturers.
Dongqi Crane installation team is well-trained in proper rigging practices, mechanical adjustments and electrical terminations. We guarantee you that all the crane installation services provided by Dongqi crane will meet the application standards and requirements. Dongqi Crane installation service include:
There are four installation forms of lifting weight limiter: hook type, wire rope type, bearing type and fixed pulley type.
1. Hook type installation form. The product structure of the hook type installation form has three types: direct display type, FM launch type and separate type. The direct display type is used for nickel-cadmium batteries as the power source, and the hook, sensor, and large-screen display are integrated into a crane hook. The FM transmitter also uses the nickel-cadmium battery as the main power source, but there is no display part. Instead, the sensor signal is sent to the driver's cab after frequency modulation, and the signal is restored by the secondary instrument for control and display. These two types of sensors do not need to be connected to the secondary instrument with cables, but the price is higher. The separated type transmits the sensor signal to the secondary instrument through the cable, and controls and displays after processing.
2. Wire rope tension type. Use a special fixture to install the sensor on the lifting wire rope, and measure the tension of the wire rope to reflect the load. This method is easy to install and has high detection accuracy.
3. Bearing seat type. Bearing seat mounting type sensor adopts double shear beam type or cylindrical shape, with special accessories to form a bearing seat, which is installed on the non-reducer side of the wire rope drum. This type of device is convenient, easy to maintain, and has high accuracy.
4. Fixed pulley type. There are two specific installation forms for the fixed pulley type. One is to configure a set of pallet brackets to slightly lift the fixed pulley shaft, so that the sensor mounted on the bracket bears the load; the other is to control the fixed pulley shaft, press the sensor into one end of the shaft, and use this when installing The root shaft can be replaced with the original pulley shaft.
1. Safety inspection of the track: check the track, bolts and splints for cracks, looseness and corrosion. If cracks are found, they should be replaced in time, and if there are other defects, they should be repaired in time. The main inspection tool is a line track flaw detector.
2. Track measurement and adjustment:
(1)は、直線のトラックで確認することができ描き鋼線は、0.5mmの鋼線が引かれ、二つの歯車のトラック測定点の方法により、プラムハンマーで打ち込みます。 の間の間隔を測定することができ約2m. .
(2)標高のトラックに計測することができますの精神です。
(3)スパンのトラックで確認でき鋼のテープを測定または赤外線の測定が可能です。 許容偏差のクレーンゲージでは±5mmの縦断勾配のトラック1/1500の許容偏差の相対的な上昇の二つのトラックが10mmになっています。
(4)トラック継手のトラックでの直接ヘッドまたは45°の角度付きます。 は斜めの共同で、ホイールの移行がスムーズには共同になります。 一般的にギャップの関節を1～2mmの影響や温度の差を考慮する必要がある"と、寒冷地域で一般的には4～6mm。 の高さの差の二つのレールの共同行するよりも1mm。
当社は中国に拠点を置くクレーンメーカーで、世界中のクレーン顧客にクレーンのカスタマイズサービスを提供しています。クレーンをカスタマイズしたい場合は、ウェブサイトにメッセージを残すか メール:sales010@cranesdq.com考え、以下の情報は、弊社営業部マネージャーに連絡します:
クレーン専門家にお問い合わせください
メッセージをお送りください。できるだけ早くご連絡いたします。
Japanese 
English 
Spanish 
French 
Indonesian 
Thai 
Russian 
Vietnamese 
Arabic