If you have an overhead crane that has been idle for a length of time due to shutdown or storage, or you have a standby crane with infrequent or irregular usage, the crane needs to be inspected before it is put back into service. OSHA has determined that cranes that have sat idle for the following lengths of time shall be inspected prior to use:
Idle wire rope inspection – All wire rope which has been idle for a period of 1 month or more due to shutdown or storage of a crane on which it is installed, shall be given a thorough inspection before it is used. A certification record including the date of the inspection, the signature of the person who performed the inspection, and an identifier for the wire ropes which were inspected, shall be kept on file.
When inspecting wire rope that has sat idle for one month or more, look for the following signs of damage or deterioration:
After the wire rope has been inspected, you will determine if any observed deterioration, defects, or damages to the wire rope will result in a safety hazard with continued use. If the wire rope is deemed a safety hazard, it needs to be removed from service, quarantined, and be replaced.
NOTE: A qualified person shall determine whether conditions found during the inspection constitute a hazard and whether a more detailed inspection is required. Any unsafe conditions uncovered during inspection shall be corrected before operation of the crane is resumed. Adjustments and repairs shall be done only by designated personnel.
クレーン専門家にお問い合わせください
メッセージをお送りください。できるだけ早くご連絡いたします。