Operation process of electric flat car and precautions for safe operation

Electric flat car is a kind of ground transportation equipment used in enterprise workshops. It can be divided into two types: tracked and trackless. For the safe use of electric flat cars, operators must abide by safe operation regulations. The editor will introduce electric flat cars to everyone. The operating procedures and precautions for safe operation.

Pay attention to the safe use of electric flat cars

Operation process of electric flat car

1. Start of electric flat car

First turn on the main power supply;

The second step is to release the emergency stop button;

The third step is to turn on the key switch;

The fourth step is to press the start button;

Immediate status: The brake release alarm is working.

2. Electric flat car operation

Observe the surrounding environment and press the operating direction button after confirming safety.

Real-time status: The vehicle runs in the expected direction.

3. Electric flat car parking

Release the run button and the vehicle will slide freely to stop, and then press the stop button, the vehicle will keep braking. Turn off the key switch and press the emergency stop button. Turn off the main power supply after get off work or temporarily not using the vehicle to ensure safety.

KPD electric flat car real-time status: parking and braking.

Safe operation of electric flat cars

1. The operator fully understands the technical performance and operation methods of the electric flat car. Only after passing the relevant training can they start operation.

2. The operators abide by the following safety operation rules for electric flat cars:

(1) Unqualified persons are not allowed to use vehicles

(2) Equipment used without exceeding specifications, overloading and partial load

(3) Before starting the vehicle, confirm that there are no people or other obstacles in the running direction of the vehicle

(4) Observe the power supply status at any time (whether the power supply lacks phase and whether the battery has sufficient power)

(5) Understand the position of the emergency stop switch and the general power supply, and turn it off at the first time in case of an emergency

(6) Be sure to disconnect the main power supply when stopping use and charging

Prevention of abnormal conditions of electric flat cars

Handling of abnormal situations in the use of electric flat cars:

(1) When the electric flat car is in use, in order to prevent derailment, the speed of the flat car should not be too fast to ensure that the operator and the operator can stand firmly when stopping;

(2) To ensure that the electric flat car does not roll over, materials and heavy objects should be evenly stacked when transporting materials;

(3) When the electric flat car transports materials and personnel, it must not exceed the limit, and cannot exceed the personnel. The flat car track is 0.5m on both sides, and it is strictly forbidden to stack various materials.

Units that use electric flat cars should formulate relevant safety management systems to ensure the safe use of flat cars.

共有Facebook

Tweet

フォ

保存