Overhead crane driver handover system

In order to ensure the safe and normal operation of cranes, enterprises using bridge cranes must improve the relevant crane management system and develop a shift system for bridge crane drivers. The editor has simply compiled a crane handover system and handover checklist for your reference. use.

1. When the work is completed, the handover driver should:

• 1. Raise the empty hook to a position close to the upper limit, stop at the specified location, turn the controllers to the zero position, and turn off the current switch.
• 2. Before handover, check whether the mechanical and electrical parts of the equipment are in good condition, and do a good job of sanitation and cleaning.
• 3. Carefully fill in the on-duty operation records (work conditions, equipment operation conditions and equipment problems or faults that need to be eliminated immediately, etc.).

2. The successor driver should:

• 1. Earnestly listen to the work dictated by the previous driver and check the shift record.
• 2. Check whether the crane control system is flexible, reliable and whether the braking performance of the brake is good.
• 3. Whether the fixed wire rope is firm, and whether the drum wire rope arrangement is correct.
• 4. Check the no-load operation before use, especially whether the limit switch, emergency switch, travel switch, etc. are safe and reliable. If there is any problem, it must be repaired in time before it can be used.

Overhead crane driver handover record table :