Главная → Новости

What are the accidents of crane heavy objects falling

Crane heavy object falling accident usually refers to the accident of personal injury or mechanical failure caused by the falling of heavy objects such as hooks and slings from the air during the oper[…]

Solution to the brake failure of the electric hoist of a single beam crane

In the workshop of electric single girder crane is electric hoist as lifting mechanism, if electric hoist brake failure fault occurs, it will cause the hook to decline. The editor of our factory sorte[…]

Scrap standard of electric hoist drum

The reel is one of the main accessories of the electric hoist , and it is a relatively durable part. Various problems will inevitably occur after a long time of use. The main damage is the wear of the[…]

Standards for inspection, maintenance and scrapping of main parts of hoisting machinery

The “Safety Regulations for Lifting Machinery” clearly stipulates the technical requirements for the main accessories of lifting machinery, and stipulates the scrapping standards for vario[…]

Electric single beam crane annual self-inspection report and basic inspection requirements

Units using electric single-girder cranes shall perform the self-inspection of the cranes in accordance with the relevant requirements of the ” Regulations on the Use of Lifting Machinery”[…]

Responsibilities and basic requirements of crane commanders and drivers

The correct operation of the crane is a very important task. Smooth operation can ensure the safe production of the enterprise and improve the production efficiency of the enterprise. In order to ensu[…]

The requirements of the “Safety Regulations for Lifting Machinery” on the electrical equipment of cranes

1 General requirements The electrical equipment of the crane must ensure that the transmission performance and control performance are accurate and reliable, and can cut off the power supply and stop […]

Common failure causes and solutions of bridge crane brakes

The brake of the double-beam bridge crane is generally installed on the shaft of the motor to brake the operation of the motor, so that its operation or lifting mechanism can be accurately and reliabl[…]

Why does the hook slip when the bridge crane is working?

Bridge cranes use hooks as spreaders and are widely used. Pay attention to crane maintenance during use. A user contacted and said that the hook of the bridge crane used had a sliding problem. Taking […]

Fixing Measures for Track Beam of Concrete Bridge Crane

Many workshops built in the early years used concrete structures, and their crane beams were also concrete. After the secondary grouting layer of the track beam foundation of some factories was damage[…]

Присылайте Свои Пожелания

    ru_RURussian