Главная → News

Common faults and solutions of crane coupling

Crane couplings are used to connect the drive shafts of various crane mechanisms and transmit motion and torque. There are many types of couplings. According to whether they contain elastic elements, [...]

Safety Regulations for Lifting Machinery Part 5: Bridge and Gantry Cranes

Safety Regulations for Lifting Machinery Part 5: Bridge and Gantry Cranes 1 Scope This part of GB 6067 specifies the basic safety requirements for the design, manufacture, installation, modification, [...]

10 Ton Overhead Crane Specification - Double Girder Electrical

1. 10 Ton Overhead Crane Power supply system: Power supply: 220V - 660V, three phase current, three-wire Driving power supply: 220V - 660V, Control power supply: 24 VAC, 36 VAC, 220VAC Safety lighting[...]

Reasons and solutions for the electric hoist motor of single beam crane not rotating

Electric hoist is a lifting device used on single-beam cranes . If maintenance and inspection work is not done well, some failures may occur. So what is the reason why the motor does not rotate after [...]

Inspection of crane cart track and trolley track

The large and small vehicles of the bridge crane must run on the track. In order to ensure the safety of the operating mechanism of the large and small vehicles, it is generally required to check 2 to[...]

Monthly inspection items and content of hoist crane

The hoist crane refers to the crane that uses the electric hoist as the lifting mechanism, usually refers to the electric hoist single beam crane . The monthly inspection of the hoist crane should b[...]

Types of crane couplings and safe use

The crane coupling is a necessary transmission component on the crane . The editor introduces the types of couplings used on the crane and the precautions for safe use. (1) Type of coupling Couplings [...]

Lifting machinery periodic inspection report form

The lifting machinery used by the enterprise shall be inspected regularly and recorded in the form according to the regulations. The editor will introduce a collected periodic inspection form for your[...]

Theoretical weight of crane rail

Crane rails are laid on load-bearing beams or foundations, which are used as the running tracks of bridge cranes or gantry cranes. There are many specifications, which can be divided into light rails [...]

Regulations for annual inspection of electric single-girder cranes

Electric single-girder cranes of more than 3 tons belong to special equipment and shall be subject to inspection according to regulations. The editor introduces the annual inspection regulations for s[...]

Присылайте Свои Пожелания

    ru_RURussian