Introduction of 10t Overhead Crane for Workshop sold to the Philippines

The 10t Overhead Crane for Workshop is sold to the ฟิลิปปินส์. Our company has long-term business dealings with Philippine customers and has rich experience in crane installation and maintenance in the Philippines. If you need a 10-ton overhead crane, you can contact me to get the latest product information and the latest price.

The single-girder production line is a technical transformation project for the company's single-girder upgrade. He works from uncoiling leveling, cutting, feeding, calendering, integral extrusion and assembly of ribs, automatic welding to finished products.

After the plate is flattened, it is rolled and formed by a 1500t grooving machine, which can realize the U-shaped groove of the main girder of the single-girder crane with a length of less than 22.5 meters without butt welds, eliminate the butt welds of the main girder, reduce the stress concentration points, and improve the strength of the main girder The overall bearing capacity of the main girder of the crane is greatly improved; the 25-meter extrusion machine can realize the overall assembly and welding of the U-shaped groove of the main beam of the crane below 25 meters, and ensure the straightness of the U-shaped groove of the main beam after welding. , reduce the horizontal bending of the main beam, and ensure the appearance quality of the crane.

LDP electric single-girder crane belongs to ultra-low clearance light and small crane. The electric hoist is located on the side of the main beam, which increases the service space of the hook and can reduce the height and cost of the factory building. LDP type electric single-girder crane is widely used in the working environment temperature of -25℃～+40℃ because of its advantages such as large trolley wheel base, stable operation, compact structure, good rigidity, sensitive operation, low noise, safety and reliability, and beautiful appearance. The place where the headroom of the workshop is low. LDP electric single-girder crane is designed and manufactured according to GB/T 3811-2008 and JB/T 1306-2008 standards, and it is a light lifting equipment used in conjunction with CD1 and MD1 electric hoists. Its rated load is 3t~10t, the span is 7.5m~22.5m, and the working level is A3