Crane for sale Rwanda

Double girder gantry crane is heavy gantry crane with double girders, which is widely used for general purpose. Double girder gantry crane are heavy duty crane, used at indoors and outdoors places where overhead crane runways are not practical. The lifting capacity of the double girder gantry crane is 5 to 500 tons. The working class of the gantry crane is A5 and A6. The main parameters of double girder gantry crane is as follow:

Truss crane mainly refers to truss gantry crane which use truss structure, welded from shaped-steel, divided into two working-level mid-level and light-level system according to the busy degree of use. Truss gantry crane is mainly used in factories, open area between fixed cross, construction and installation sites, lumber yards and other places, due to the wind size is smaller than the box-shaped structure. Truss crane is particularly suitable for large sandstorm place, generally for handling and lifting work.

Double speed electric hoist is a small-sized lifting equipment, which is installed on the single girder, bridge cranes, gantry cranes, jib cranes for material handling. As one of the commonly used material handling equipment, the double speed electric hoist is usually used in factory, mining, railway, port, and storage, etc.

This QB explosion proof bridge crane work together with a BCD explosion proof electric hoist. The structure equipped with sealed cover,it has strong explosion proof ability.The lift capacity is 5ton-32ton.Span length is 5-40m. Work duty A3-A4,working environment temperature is -25~ 40℃.
Explosion proof grade is : Exd II BT4, Exd II CT4.It can work in combustible, flammable, explosive, heavy dust factory, warehouse, yard and other places corrosive environment.

Metallurgical single girder crane is single girder overhead crane supporting the use of metallurgical electric hoist, applicable to metallurgy, foundry places for handling molten metals.

The bottom of the main beam with thermal insulation layer, coated with heat resistant paint to solve the heat problem, adopt dual brake, dual limit to ensure safety. Crane working grade is A6, working environment temperature ≤60 ℃.

Double trolley overhead crane is a double girder overhead crane equipped with two trolleys, which can work simultaneously or separately. They are mainly used to lift long and big loads or sets of loads with two long distance lifting points. The lifting capacity of the double trolley overhead crane is 5 ton to 400 ton, and the work class is A5 and A6.

Portable gantry crane is also know as, movable gantry crane, rolling gantry crane,which is small light duty gantry crane for light material handling with the capacity below 7.5 ton. The portable gantry crane is your portable material handling solution with high cost-effectiveness. The Gantry portable hoist crane is produced by Chinese well-known portable gantry crane manufacturer, Dongqi Hoist and Crane.