Homeข่าว → Electric single-beam (suspension) crane maintenance record sheet

Electric single-beam (suspension) crane maintenance record sheet

The electric single-beam cranes and single-beam suspension cranes used in the workshop shall be inspected and repaired, and the inspection and repair work shall be done by specialized personnel, and the inspection record sheet shall be prepared.

Electric single-beam (suspension) crane maintenance record

Maintenance order number: Equipment model: Department of use:

project Serial number Overhaul content Inspection
conclusion
Remarks
General component safety inspection Hook and pulley 1. ⑴Check for cracks and deformation: Whether there is obvious deformation or cracks.
⑵Wear state: No abnormal wear on the hook mouth, pulley groove and axle.
⑶Abnormal inspection: check whether the pulley is damaged, whether the hook nut is locked, and the shell is connected Whether the bolts and the fixing bolts of the baffle plate are loose, etc.
⑷ Rotation inspection: whether the hook and pulley can rotate flexibly
สายเชือก 2. ⑴Serious corrosion, pitting, pitting, formation of grooves,
loose or broken strands of outer steel wire should not occur; ⑵Whether the fixed parts of the wire rope are in danger of loosening, and there should be no lack of oil or gnawing at the contact parts of the pulley and balance wheel Troubles such as rope, slipping, etc.
Braking device 3. ⑴The brake wheel has no cracks (not including the microcracks in the hardened layer of the brake wheel surface);
⑵There is no friction between the brake wheel and the friction plate when the brake is opened, and the brake wheel and the friction plate contact evenly when the brake is closed, which does not affect braking Defects in performance and oil pollution;
⑶ The brake is adjusted appropriately, and the brake is stable and reliable;
reel 4. ⑴Whether there are cracks (especially in the middle part);
⑵Whether the rope guide is broken;
⑶Whether the rope groove is worn; when the wall thickness of the drum is worn up to 20% of the original wall thickness, or when the wire rope skips frequently, it should be scrapped reel.
⑷Whether the cylinder shaft is worn;
⑸Whether the screws on the two ends of the web are fastened, and no cracks appear on the web;
ตัวลด 5. ⑴Check the gear transmission, whether
there are abnormal noises during operation; ⑵The vibration of each bearing part; whether there is abnormal vibration;
⑶ Whether the oil temperature is normal; whether there is oil leakage phenomenon; whether the oil level position is normal;
wheel 6. ⑴Wear inspection: No abnormal wear on the wheel tread and the inner surface of the rim;
⑵Crack inspection: No abnormal cracks on the surface of the wheel.
Safety protection device Stopper 7. ⑴ Whether the limit switch is sensitive, safe and reliable; whether the contact of the switch is damaged or worn.
⑵ Check whether the wiring fixing and connecting bolts are loose.
⑶ The hook pulley group is lifted to the upper limit position, and the lifting limit switch should be able to act immediately
โอเวอร์โหลด limiter 8. Whether there is an overload limiter, when the alarm setting is reached, it should be able to detect the alarm and disconnect the ascending loop
9. The shock absorber is installed firmly, no damage to the
protective cover and other protective devices
Note: In the inspection conclusion, qualified "√" and unqualified "X"
project Serial number Overhaul content Inspection
conclusion
Remarks
ชิ้นส่วนไฟฟ้า Electrical control device 10. The electrical equipment and wiring are installed in compliance with the specifications, and there is no aging, no damage, no electrical bare points, and no temporary wires.
Electrical protection 11. Sensitive, reliable and effective
Metal structure The main force member 12. Whether the main stressed components have overall or partial instability; fatigue deformation, cracks, severe corrosion, etc.
Metal structure 13. Whether the connection of the metal structure and the welding seam have obvious deformation and cracking
14. Whether the bolts or riveted connections are loose or defective
15. Whether the pre-tightening force of high-strength bolts reaches
track Track bolt※ 16. All track bolts are fastened
Note: In the inspection conclusion, qualified "√" and unqualified "X"

  ติดต่อของผู้เชี่ยวชาญมารถเครน


ส่งข้อความมาถึงพวกเราและพวกเราจะกลับมาหาคุณเร็วที่สุดเท่าที่เป็นไปได้

    ส่งของคุณต้องการ

      thThai