Lifting workers are a type of work dealing with lifting machinery. Some people may not be too clear about the work of the lifting workers. The editor will introduce the description of the lifting jobs.
1. Adhere to the safety production policy, establish the idea of safety first, abide by labor discipline, stick to the job position, and operate according to regulations.
2. Familiar with the safety technical knowledge of hoisting command.
3. Responsible for the reasonable selection of various lifting equipment and rigging, and to ensure their safe use.
4. Responsible for removing various lifting obstacles at the work site.
5. Responsible for calculating the position of the center of gravity of special-shaped components, and selecting suitable lifting points to facilitate balanced lifting.
6. Implement the safety technical requirements for lifting operations, and be responsible for the safety of lifting and transportation.
1. Lifting objects cannot exceed the rated lifting load of the lifting equipment.
2. Crane slings, rigging and wire ropes must meet the lifting requirements.
3. The lifting of special-shaped parts must locate the center of gravity to ensure a balanced lifting.
4. For the lifting of oversized objects, special lifting measures must be formulated.
1. The spreader, rigging, and wire rope may break during lifting, resulting in equipment damage or personal injury.
2. Unclear confirmation of the crane signal may cause equipment damage or personal injury.
3. Lifting of special-shaped parts without correcting the center of gravity may cause equipment damage or personal injury.
4. There are people under the lifting parts, which may cause injury.
5. Over-load lifting may cause driving, damage to lifting parts, and personal injury.
6. The brake protection system of the lifting equipment fails and an accident may occur.
1. Select the appropriate lifting gear and rigging according to the lifting object, and the confirmation is complete.
2. Determine the center of gravity of the object, choose a suitable lifting point, and bind the lifting parts firmly, and the confirmation is complete.
3. Send the lifting signal, you can start lifting, and the confirmation is complete.
4. The hoisting has been tested before hoisting, and the confirmation is complete.
5. The equipment has been hoisted to the designated location, the sling has been removed, and the lifting equipment has returned to its place. Confirmation is complete.
Attend the pre-class meeting → put on labor protection supplies → enter the workplace → confirm the safety of the working environment → select the appropriate lifting equipment and rigging → check the binding of the lifting object → send the hoisting signal → direct the hoisting equipment to the designated location → remove the hoist Rigging→Clean up the scene.
The work of lifting workers in different companies may be slightly different, but they are all the same. Everyone must abide by the relevant safety operating procedures.
ติดต่อของผู้เชี่ยวชาญมารถเครน
ส่งข้อความมาถึงพวกเราและพวกเราจะกลับมาหาคุณเร็วที่สุดเท่าที่เป็นไปได้
Thai 
English 
Spanish 
Japanese 
French 
Indonesian 
Russian 
Vietnamese 
Arabic