The difference between European crane and traditional crane

Compared with traditional cranes, the performance of European cranes has been greatly improved, such as compact structure, large space for effective improvement, quietness, protection-free, variable frequency stepless speed regulation, stable operation, low failure rate, long service life, etc., after-sales service The cost is greatly reduced. The European-style crane manufacturer tells you the advantages of European-style cranes.

All these optimizations inevitably lead to load shedding of the crane's load-bearing beam, so the overall structure of the crane is much smaller than traditional methods. Therefore, when users have higher requirements for crane wheel pressure, European-style crane manufacturers advocate the use of European-style cranes, because as mentioned above, compared with traditional cranes, its weight is reduced by more than 30%. In addition, most of the eight-wheel hinges are used, and the wheel pressure is very low, which is very beneficial to the service life of the factory structure. In addition, if a new factory is built, it is recommended to use a European-style crane, because it requires less workshop space than a traditional crane, which can save a lot of factory costs. The cost saved is enough to compensate for the gap between European cranes and traditional cranes, which is equivalent to buying better equipment with the same or less investment.

Remote monitoring and remote diagnosis. European cranes realize long-distance monitoring and long-distance diagnosis. When equipment at different addresses fails, the European crane will automatically notify the manufacturer of the failure. Then, use the fault diagnosis system that resides in the system itself to diagnose faults, and perform protection based on the diagnosis results; if the fault point or cause of the fault cannot be determined, through the request of the long-distance fault diagnosis information service unit, use the center's fault diagnosis and protection resources Perform fault diagnosis on the equipment. The realization of this long-distance diagnosis function undoubtedly brings convenience to customers and improves the timeliness of after-sales service. At the same time, it also saves labor costs for crane manufacturers.

Low failure rate and long service life. European-style cranes have greatly reduced the failure rate and repair costs. The European-style cranes produced by Dongqi Cranes can generally be guaranteed to fail within 5 years and have a service life of up to 30 years. It has greatly reduced the repair cost of crane manufacturing companies, and has also established a brand image and outstanding reputation for the manufacturing companies.

What is the difference between European crane and ordinary crane? European-style cranes are mainly based on traditional crane methods, improving the quality of parts and making the structure more compact. Because the data is better than the original parts, the volume and weight of each part are effectively reduced. For example, the transmission mechanism is a three-in-one reducer with hard tooth surface, alloy cast or ductile iron wheel sets, hook group T-level hooks, rolling pulleys for pulleys, steel plates for drums, and imported high-strength galvanized steel wire ropes for wire ropes.

Chia sẻ trên Facebook

Thấy

Theo chúng tôi

Tiết kiệm