What is the minimum distance between the top of the main beam of a single-beam crane and the roof?

As the crane equipment that runs under the roof of the workshop, in order to ensure the safe operation of the single-beam crane , a certain distance must be reserved between the main beam and the roof and both ends of the main beam and the side of the plant to ensure that no other problems occur during the operation of the crane. .

In order to ensure the normal operation of the single-girder crane, a safe distance between the top of the main girder of the crane and the bottom of the roof of the factory building must be kept at least 20 cm, that is, 20 cm. The shortest span between the outermost end beams on both sides of the main beam and the side of the factory building should be kept at a safe distance of 10 cm, that is, 10 cm. When installing the track, the shortest distance between the center of the track and the side of the factory building should be kept at a distance of 25 cm. Units that build steel structure workshops generally pay attention to this point. If you install it yourself, you must pay attention to this.

When constructing a steel structure factory building, the contractor will also pay attention to the installation position of the load-bearing beam, and reserve enough space for the installation of the single-beam crane. If the distance between the crane and the roof is not too large, it is best not to completely close the roof of the factory building before installing the crane, so that the crane can be hoisted during installation, which can also save a lot of trouble during installation.

Chia sẻ trên Facebook

Thấy

Theo chúng tôi

Tiết kiệm