Abstract: Briefly introduce the application of 500kg electric chain hoist in the aluminum alloy bridge production line. It is equipped with an I-beam structure to make a monorail crane. Based on the electric chain hoist standard, it is equipped with a travel limit switch and a การควบคุมระยะไกล at the front and rear, so that it will stop automatically when running back and forth to the standard distance. The application of the remote control is convenient for customers to realize wireless remote control at a long distance, which is convenient and easy to operate.
This case is an order for a chain hoist from a Philippine machinery factory, which will provide services for the aluminum alloy bridge production line. Aluminum alloy bridge has the characteristics of simple structure, novel style, large load, light weight, corrosion resistance, long service life, convenient installation, clean and beautiful, no damage to cables, etc., in coastal salt spray areas, high humidity and corrosion resistance In the environment, it can show its unique anti-corrosion performance. The customer uses a 500Kg electric chain hoist as the monorail hoisting mechanism, in conjunction with the remote control and the travel limit switch, which increases the degree of participation in automation and leaves a good foundation for the improvement of the subsequent project plan.
According to the requirements provided by the customer, we recommended the monorail hoisting scheme, which is to erect an I-beam above the production line to achieve full coverage in the work area. Install a 500kg electric trolley-operated electric chain hoist on the I-beam. Because there are air ducts at the front and rear, we are worried that the hoist will run into it in the past, so we installed the travel limit switch at both ends. When it runs to the top, the travel limit is automatically stopped, which effectively controls the operation of the hoist trolley to ensure The normal use of the air duct. And because the customer needs to operate the hoist at a long distance, we use the remote control. The effective control distance of the remote control is 50m-100m, so the distance of 10m is no problem.
After the materials arrive at the factory in the Philippines, the installers will assemble the scaffolding on site according to the site conditions, equip the installation devices, and perform on-site construction. Because the monorail crane structure is adopted, both ends of the I-beam are fixed on the wall, so it is necessary to install corresponding flanges at both ends. After the steel structure is installed, the electric chain hoist is installed, and then the whole machine is debugged.
The application of the running electric chain hoist in the bridge production line can effectively improve the work efficiency, so that the original working condition of two personnel lifting manually can now be completed by one hoist, which not only makes the field equipment simple, Convenient, and the entire site is orderly and tidy. Reduce the overall work intensity, but also reduce the cost of the entire workshop.
The application of electric chain hoist in industrial production is increasing. This article briefly introduces the application of electric chain hoist in the aluminum alloy bridge production line. The monorail crane using electric chain hoist as the lifting mechanism can effectively reduce labor costs and contribute to the change of the on-site working environment. When the remote control is remotely controllable, it greatly reduces the back and forth of on-site operators. Running provides a guarantee for a good and orderly production and life in the workshop.
We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a electric chain hoist, you can leave a message on the website or email, tell us the following information, and our sales manager will contact you: